"> Kaeser Marine Kaeser Mobilair 51 200/14
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 3 verified suppliers & service companies for Kaeser Marine in the Maritime Network Find suppliers →
Kaeser Marine

Kaeser Mobilair 51 200/14

Kaeser Marine Kaeser Mobilair 51 200/14 is listed in this library as a marine compressor in the Compressors / Deck Air Compressor category. Equipment of this class is typically installed in the engine room, compressor room, refrigeration plant, or dedicated service machinery space according to the compressed medium and duty. Its shipboard purpose is to raise gas pressure for starting air, service air, control air, refrigeration, cargo, or another shipboard process. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or operating limit is provided in the source entry. Where adjacent models in the same product family differ in rating, size, materials, control options, certification, or accessories, refer to the manufacturer documentation for the exact model-specific differences.

Components & Design

Component data being added…

Technical Data

compressor type deck_air_compressor
pressure bar 14
capacity nm3h 200
stages 3

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Suction filter restriction, valve fouling, or poor inlet conditions reduce capacity and cause long running time or low final pressure
Discharge or suction valve wear from deposits, fatigue, or contamination causes reduced compression, high stage temperatures, or abnormal pulsation
Lubrication problems from low oil level, contamination, or pump failure cause high bearing temperature, noise, or low oil-pressure alarms
Cooler fouling or cooling-water restriction causes high discharge temperature and thermal trips
Seal, piston ring, packing, rotor, or gasket wear causes gas leakage, oil carryover, reduced capacity, or frequent cycling

Service & Maintenance

Trend stage pressures and temperatures, oil condition, cooling performance, running time, leakage, vibration, and safety trips. Inspect filters, valves, coolers, drains, separators, unloaders, drive components, and relief devices; use manufacturer data for exact pressure settings and wear limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry the applicable valve service kits, piston rings or sealing elements, gaskets, filters, lubricating-system parts, belts or coupling elements, and critical sensors or unloaders recommended for the installed compressor.
Equipment Model #80809 · ✓ still in production