Starting Air Compressor · Compressors
Coltri Marine Coltri MCH 32 500/40 is a starting-air compressor (Compressors / Starting Air Compressor). It is normally installed in the engine room close to the starting-air receivers and associated cooling and drain arrangements. It is intended to recharge the vessel's high-pressure starting-air system for main and auxiliary engines. In service it interfaces with the starting-air receivers, intercoolers or aftercoolers, separators, drains, relief devices, motor or engine drive and automation.
What our service work and the manufacturer documentation say about keeping this model running.
Check stage temperatures, receiver charging performance, cooling flow, drain operation, relief devices, vibration, lubrication and leakage. Inspect valves, filters, belts or couplings where fitted and verify automatic start/stop logic. Exact pressure settings, clearances and wear limits must be taken from manufacturer documentation.
Keep intake filters, valve service parts, gaskets, O-rings, approved lubricant, drain-valve parts and the model-specific piston-ring or seal kit recommended for the installed compressor.
Free of charge — send us your request for Coltri Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Coltri Marine first.
Tell us what you need for this Coltri Marine MCH 32 500/40 — a part, a service call, a second opinion. Are you Coltri Marine? Claim this brand page.
Service engineer? Write the day report for this MCH 32 500/40 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.