Starting Air Compressor · Compressors
Coltri Marine Coltri MCH 13 200/30 is a starting-air compressor (Compressors / Starting Air Compressor). It is normally installed in the engine room close to the starting-air receivers and associated cooling and drain arrangements. It is intended to recharge the vessel's high-pressure starting-air system for main and auxiliary engines. In service it interfaces with the starting-air receivers, intercoolers or aftercoolers, separators, drains, relief devices, motor or engine drive and automation.
What our service work and the manufacturer documentation say about keeping this model running.
Check stage temperatures, receiver charging performance, cooling flow, drain operation, relief devices, vibration, lubrication and leakage. Inspect valves, filters, belts or couplings where fitted and verify automatic start/stop logic. Exact pressure settings, clearances and wear limits must be taken from manufacturer documentation.
Keep intake filters, valve service parts, gaskets, O-rings, approved lubricant, drain-valve parts and the model-specific piston-ring or seal kit recommended for the installed compressor.
Free of charge — we forward your request to qualified suppliers for Coltri Marine equipment from our network of over 114,000 maritime companies.
Other models of the same equipment type, Coltri Marine first.
Tell us what you need for this Coltri Marine MCH 13 200/30 — a part, a service call, a second opinion. Are you Coltri Marine? Claim this brand page.
Service engineer? Write the day report for this MCH 13 200/30 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.