"> Sabroe (Johnson Controls) Sabroe CMO 24 Series
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Sabroe (Johnson Controls) in the Maritime Network Find suppliers →
Sabroe (Johnson Controls)

Sabroe CMO 24 Series

Sabroe (Johnson Controls) Sabroe CMO 24 Series is a shipboard unit in the Compressors group, classified in the source as Refrigeration Compressor. It is normally installed in the engine room, compressor room, refrigeration plant or deck service area according to air/refrigerant duty. Its primary duty is to raise the pressure of air or refrigerant for starting, service, deck or refrigeration systems. In service it interfaces with suction filters, intercoolers/aftercoolers where applicable, receivers, separators, lubrication system, safety valves, motor drive and controls. Compared with neighboring entries in the same product family, this record is the exact Sabroe (Johnson Controls) Sabroe CMO 24 Series variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

compressor type refrigeration_compressor

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Valve wear or carbon/fouling in reciprocating stages, typically indicated by reduced capacity, high temperatures or slow receiver charging
Piston/ring or internal wear, typically indicated by oil carryover, reduced pressure or increased blow-by
Cooling-water/air cooler fouling, typically indicated by high discharge temperature or thermal trip
Lubrication failure or bearing wear, typically indicated by noise, overheating or high oil consumption
Control, pressure switch or unloading fault, typically indicated by frequent cycling, failure to start/stop or abnormal pressure

Service & Maintenance

Inspect filters, valves, coolers, lubrication, belts/coupling, drains, safety devices, vibration and temperature trends; exact clearances, pressures and overhaul limits come from manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep valve kits, piston/ring or seal kits as appropriate, filters, gaskets, belts/coupling parts, pressure switches and critical bearings.
Equipment Model #80619 · ✓ still in production

Wer liefert dieses Teil? 9 Betriebe im Verzeichnis · 1 aus Herstellerlisten

Roger International Equipment & Services Pte Ltd
Singapore, Singapore
✓ autorisiert
B&V Køleteknik
Odense C, Denmark
Frigomarine
Piraeus, Greece
JOHNSON CONTROLS INDUSTRIES SAS
France
Johnson Controls Denmark ApS (Marine / SABROE)
Højbjerg, Denmark
Kenmark Tech Solutions
India
PSYCTOTHERM (Ligeros G & Sia OE)
Piraeus, Greece
SURAL
Vigo, Spain
Towa Marine & Industry Services Pte Ltd
Singapore, Singapore
Weitere aus Hersteller- und Marktplatzverzeichnissen:
Johnson Controls DK ApS, Marine · Denmark
Alle Betriebe für Sabroe (Johnson Controls) ansehen →