Lube Oil Separator · Separators & Purifiers
Yokogawa Yokogawa SA-300 LO 3000l/h LO — Separators & Purifiers. The supplied category identifies the equipment as Lube Oil Separator, and it is normally installed in the engine-room fuel, lubricating-oil, sludge or bilge-treatment area with feed, clean-liquid and sludge connections. In that listed role, its primary purpose is to separate water and solid contamination from fuel, lubricating oil, sludge or another liquid stream by centrifugal force. Fuel-oil, lube-oil and sludge separators use similar high-speed bowl principles but differ in process setup, sealing and discharge arrangements for the treated medium. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Yokogawa first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect bowl and disc-stack cleanliness, seals, operating-water passages, drive condition, vibration and discharge sequence. Confirm correct assembly and locking after overhaul and review outlet quality and process temperature. Check alarms and protective trips under the approved procedure. Refer to the manufacturer documentation for the exact figure for bowl speed, assembly, wear and process settings.
Carry bowl seal kits, O-rings, operating-water seals, solenoid or valve parts, bearings where appropriate, friction or drive components and manufacturer-recommended separator consumables.
Free of charge — we forward your request to qualified suppliers for Yokogawa equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Yokogawa SA-300 LO 3000l/h LO — a part, a service call, a second opinion. Are you Yokogawa? Claim this brand page.
Service engineer? Write the day report for this SA-300 LO 3000l/h LO in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.