OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Separators & Purifiers› Fuel Oil Separator› Yokogawa SA-500 Series

SA-500 Series

Fuel Oil Separator · Separators & Purifiers

Class-certified type (DNV register) · technical data sheet not yet verified

Yokogawa SA-500 Series is a marine fuel oil separator in the Separators & Purifiers / Fuel Oil Separator category. Equipment of this class is typically installed in the engine-room treatment area connected to the relevant fuel, lubricating-oil, sludge, or bilge system. Its shipboard purpose is to separate unwanted water, solids, sludge, or oil phases from the process fluid before reuse, storage, or controlled discharge. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the installed configuration. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Separator TypeFuel Oil Separator
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect leakage, vibration, bowl or separation-stage cleanliness, drive and bearings, operating water, filters, valves, sludge discharge, outlet quality, alarms, and interlocks. Exact bowl speeds, interface settings, temperatures, and wear limits must follow manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Typical spares include bowl or housing seals, gaskets, bearings, friction or drive parts, filters, water-system seals, solenoids, sensors, and model-specific service kits.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Yokogawa equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Fuel Oil Separator.

Other models of the same equipment type, Yokogawa first.

By manufacturer Alfa LavalGEA WestfaliaMitsubishi Kakoki (MKK)PieralisiHi FujiWestfaliaYokogawaSasakuraParker HannifinCompass Water SolutionsPall CorporationHYDACMarinflocMitsubishiFacetAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Yokogawa models More like Yokogawa SA-500 Series
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Yokogawa SA-500 Series — a part, a service call, a second opinion. Are you Yokogawa? Claim this brand page.

Service engineer? Write the day report for this SA-500 Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.