Lube Oil Separator · Separators & Purifiers
Pieralisi Pieralisi FP 2500 LO 3000l/h LO is identified in the source list as a lube oil separator. It is installed in the engine-room fuel, lubricating-oil or sludge-treatment area with feed, heating, clean-liquid, sludge and control connections appropriate to the process. Its purpose is to use centrifugal force to separate water and solid contamination from fuel or lubricating oil, or to concentrate sludge according to the category. The source record provides no additional model-specific operating figure beyond the listed designation and category. A high-speed rotating bowl, disc stack or sludge space, feed and discharge passages and operating-water or control system form the separator. The exact model designation distinguishes bowl size, throughput and automation arrangement from neighboring purifiers; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Pieralisi first.
What our service work and the manufacturer documentation say about keeping this model running.
Monitor vibration, operating temperature, feed condition, discharge behavior and clean-liquid quality. Clean the bowl and disc stack using procedures that avoid damage or incorrect reassembly. Inspect spindle, bearings, seals, operating-water passages and bowl-locking parts during overhaul. Verify feed heating and process settings match the actual service. Function-test automatic sludge discharge and alarms after maintenance. Refer to the manufacturer documentation for the exact figure for bowl speed, clearances, throughput and service limits.
Keep bowl seals, O-rings, operating-water valve parts, bearings, drive belts or friction parts where applicable, feed-pump seals and manufacturer-recommended bowl service kits. Critical vessels may hold selected bowl components or a spare operating-water module. Confirm exact parts using the separator serial number.
Free of charge — we forward your request to qualified suppliers for Pieralisi equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Pieralisi FP 2500 LO 3000l/h LO — a part, a service call, a second opinion. Are you Pieralisi? Claim this brand page.
Service engineer? Write the day report for this FP 2500 LO 3000l/h LO in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.