Fuel Oil Separator · Separators & Purifiers
It is normally installed in the engine room or purifier room close to fuel, lube-oil or bilge treatment systems. Its primary duty is to separate water and solid contaminants from oil or oily water using centrifugal or separator processes appropriate to the service. In service it interfaces with feed pumps, heaters where fitted, sludge discharge, clean-oil outlets, water connections, controls and alarm systems. Compared with neighboring entries in the same product family, this record is the exact Pieralisi FP 5000 Series variant; the model designation should be quoted exactly when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect bowl/disc components, seals, spindle/bearings, operating-water passages, feed temperature/condition, vibration and alarm history; use manufacturer documentation for exact bowl speeds, clearances and service limits.
Keep complete seal kits, bowl O-rings, operating-water solenoid parts, bearings/service kits, feed-pump seals and critical control sensors.
Free of charge — send us your request for Pieralisi equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Pieralisi first.
Tell us what you need for this Pieralisi FP 5000 Series — a part, a service call, a second opinion. Are you Pieralisi? Claim this brand page.
Service engineer? Write the day report for this FP 5000 Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.