Shell-and-Tube Heat Exchanger · Heat Exchangers
Onda TL 50 Series is a shell-and-tube heat exchanger. It is normally installed in an engine-room cooling, heating or process system with one medium routed through tubes and the other around the tube bundle inside the shell. Its purpose is to transfer heat between separated fluid circuits while providing a robust pressure-containing arrangement suitable for marine service. Compared with plate exchangers, the shell-and-tube arrangement uses a tubular heat-transfer surface and may allow mechanical tube-side cleaning depending on construction. The exact model designation identifies shell, bundle and connection configuration; tube material, surface area and duty must be confirmed from manufacturer documentation.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Trend temperatures and pressure drop and inspect accessible covers, tube sheets and connections for leakage. Clean the tube side using a method suitable for the deposits and tube material. Pressure-test or leak-test the circuits when cross-contamination is suspected, following the approved procedure. Inspect sacrificial protection where fitted and check for erosion at inlets and tube ends. Ensure connected piping is independently supported. Refer to manufacturer documentation for exact test pressure, tube-plugging limits and acceptance criteria.
Keep cover gaskets, O-rings or seals, sacrificial anodes where fitted and approved tube-plugging or repair materials if permitted by the manufacturer and class. For critical equipment, spare covers or tube-bundle components may be held ashore. Confirm exact material and dimensions from the unit documentation.
Free of charge — send us your request for Onda equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Onda first.
Tell us what you need for this Onda TL 50 Series — a part, a service call, a second opinion. Are you Onda? Claim this brand page.
Service engineer? Write the day report for this TL 50 Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.