OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Heat Exchangers› Plate Heat Exchanger› GEA NT 250 3000kW Jacket water cooling

NT 250 3000kW Jacket water cooling

Plate Heat Exchanger · Heat Exchangers

Class-certified type (DNV register) · technical data sheet not yet verified

GEA GEA NT 250 3000kW Jacket water cooling is listed as a Plate Heat Exchanger within the Heat Exchangers category. It is typically installed in engine-room cooling, heating, freshwater, fuel or HVAC circuits where two fluid streams exchange heat without mixing. Its engineering role is to transfer thermal energy between shipboard fluid circuits while keeping the media physically separated. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Heat Exchanger TypePlate Heat Exchanger
Capacity (kW)3000
MaterialStainless Steel 316
Related models

Also in Plate Heat Exchanger.

Other models of the same equipment type, GEA first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Monitor inlet/outlet temperatures, pressure drop and leakage, and inspect accessible plates, tubes, gaskets and connections. Clean heat-transfer surfaces using methods compatible with the materials and service. Tightening dimensions, pressure-test values and rejection criteria must follow manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry compatible gaskets, seals, selected plates or plugs where applicable, and cleaning/connection consumables recommended for the installed unit.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for GEA equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All GEA models More like GEA NT 250 3000kW Jacket water cooling
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this GEA NT 250 3000kW Jacket water cooling — a part, a service call, a second opinion. Are you GEA? Claim this brand page.

Service engineer? Write the day report for this NT 250 3000kW Jacket water cooling in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.