Plate Heat Exchanger · Heat Exchangers
GEA GEA NT 150 200kW FW cooling — Heat Exchangers, FW cooling. The supplied category identifies the equipment as Plate Heat Exchanger, and it is normally installed in an engine-room cooling, heating, condensing or heat-recovery circuit according to the vessel piping arrangement. In that listed role, its primary purpose is to transfer heat between two fluid streams while keeping the media separated. Plate, brazed-plate and shell-and-tube exchangers differ in construction, opening method and repair approach, so cleaning and pressure-boundary service must match the actual design. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, GEA first.
What our service work and the manufacturer documentation say about keeping this model running.
Trend inlet and outlet temperatures and differential pressure and inspect for leakage. Open or clean the exchanger only by the approved method and examine plates, tubes, gaskets or end covers for deposits, corrosion and deformation. Investigate cross-contamination promptly. Refer to the manufacturer documentation for the exact figure for tightening, test pressure and wear limits.
Carry the correct gaskets or seals, representative plates or tube-repair provisions where approved, port seals, strainers and compatible cleaning materials.
Free of charge — we forward your request to qualified suppliers for GEA equipment from our network of over 114,000 maritime companies.
Tell us what you need for this GEA NT 150 200kW FW cooling — a part, a service call, a second opinion. Are you GEA? Claim this brand page.
Service engineer? Write the day report for this NT 150 200kW FW cooling in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.