"> Parat Halvorsen Parat Halvorsen EGE 2t/10bar
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Parat Halvorsen

Parat Halvorsen EGE 2t/10bar

Parat Halvorsen Parat Halvorsen EGE 2t/10bar is a shipboard unit in the Boilers group, classified in the source as Exhaust Gas Boiler. It is normally installed in the engine room or boiler space, with exhaust-gas boilers connected to the main-engine exhaust system. Its primary duty is to generate steam or hot water for fuel heating, cargo heating, hotel services and other auxiliary consumers. In service it interfaces with feedwater system, burner/fuel system or exhaust-gas path, steam distribution, safety valves, level controls and automation. Compared with neighboring entries in the same product family, this record is the exact Parat Halvorsen Parat Halvorsen EGE 2t/10bar variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Parat Halvorsen Parat Halvorsen EGE 2t/10bar

Components & Design

Component data being added…

Technical Data

boiler type exhaust_gas_boiler
steam capacity th 2
design pressure bar 10
fuel type exhaust_gas

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Burner nozzle/ignition fouling or fuel-supply fault, typically indicated by poor flame, smoke, flame failure or repeated trips
Water-side scale or sludge, typically indicated by poor heat transfer, high metal temperature or unstable level
Fireside soot accumulation, typically indicated by high exhaust temperature, poor steam generation or soot-fire risk
Feedwater/level-control fault, typically indicated by unstable drum level or low/high-level alarms
Tube leakage or refractory damage, typically indicated by water/steam leakage, pressure loss or hot spots

Service & Maintenance

Inspect burner and flame safeguards, water level controls, feedwater quality, safety valves, tubes/heating surfaces, refractory and soot deposits; exact pressures, chemical limits and safety-valve settings come from approved boiler documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep burner nozzles/electrodes, flame sensors, gaskets, level-control components, feedwater-valve parts and common burner/fuel-system service items.
Equipment Model #78565 · ✓ still in production