Service Air Compressor · Compressors
Ingersoll Rand Marine Sierra 200/10 is a service air compressor. It is normally installed in the engine room, deck machinery area or utility space and connected to the corresponding compressed-air receiver and distribution system. Its purpose is to generate compressed air for starting, service or deck duty according to the listed compressor category. Compression stages, cooling arrangement, unloading system, lubrication and drive configuration are model-specific and must be confirmed from manufacturer data. Refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Check oil level and condition where applicable, cooling flow, discharge temperatures, valves, drains, separators, relief devices and non-return arrangements. Listen for abnormal knocking and compare receiver filling or delivery performance with the vessel's established normal condition. Inspect for air, oil and cooling-water leakage and confirm automatic condensate drains are functioning. Examine drive belts or coupling components where fitted and verify guards are secure. During overhaul, inspect valves, compression elements, bearings and coolers for deposits and wear. Refer to the manufacturer documentation for the exact figure for pressures, clearances, valve settings and overhaul criteria.
Keep suction and discharge valve service parts, piston rings or compression-element seals as applicable, gaskets, filters, lubrication consumables and drain or unloader service parts recommended for the installed compressor. Critical installations should hold enough parts to recover from typical valve or sealing faults. Confirm exact parts against model and serial number.
Free of charge — send us your request for Ingersoll Rand Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Ingersoll Rand Marine first.
Tell us what you need for this Ingersoll Rand Marine Sierra 200/10 — a part, a service call, a second opinion. Are you Ingersoll Rand Marine? Claim this brand page.
Service engineer? Write the day report for this Sierra 200/10 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.