"> Burckhardt Burckhardt API-618 500/30
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Burckhardt in the Maritime Network Find suppliers →
Is Burckhardt your company? Claim this page
Burckhardt

Burckhardt API-618 500/30

Burckhardt Burckhardt API-618 500/30 is identified in the source list as a cargo compressor. It is installed in the cargo machinery area and connected to the vessel's cargo vapor or handling system. Its purpose is to compress cargo vapor for transfer, pressure control or other approved cargo-system duties. The source record provides the existing record note '30 bar'. Cargo compatibility, sealing, cooling and capacity control are model-specific and critical to safe operation. The exact model designation and any pressure or capacity information contained in the source distinguish size and service from neighboring compressors; refer to the manufacturer documentation for the exact figures.

Components & Design

Component data being added…

Technical Data

compressor type cargo_compressor
pressure bar 30
capacity nm3h 500
stages 3

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Valve or compression-element wear caused by contamination, inadequate lubrication or long service, resulting in reduced capacity and abnormal temperatures
●Seal or packing leakage caused by wear, thermal distortion or damaged sealing components, resulting in air or gas leakage and reduced performance
●Cooling-system fouling or loss caused by scale, blocked passages or pump faults, resulting in elevated discharge or bearing temperatures
●Lubrication or bearing failure where applicable caused by low oil supply, contamination or misalignment, resulting in vibration, temperature rise or trips
●Capacity-control, unloading or non-return valve malfunction caused by sticking, actuator or control faults, resulting in unstable operation, difficult starting or abnormal cycling

Service & Maintenance

Monitor suction and discharge conditions, temperatures, vibration and capacity-control behavior in accordance with the vessel procedures. Inspect coolers, valves, filters, drains, bearings and lubrication system where applicable. Check for air, gas, oil and cooling-water leakage and investigate recurring trips rather than repeatedly restarting the machine. Function-test unloading, capacity-control and protective devices using approved procedures. Keep system cleanliness and material compatibility under control. Refer to manufacturer and class documentation for exact clearances, alarm limits and overhaul criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep model-correct seals or packing, valve or compression-element service parts, bearings, filters, gaskets and capacity-control or unloader components recommended by the manufacturer. Service-critical materials must match the handled medium. Confirm all parts against the compressor serial number and application.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Burckhardt?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #77827 · ✓ still in production