OceanSphereENGINES
Library› Engine Room› Compressors› Service Air Compressor› Sperre ASV 400/10

ASV 400/10

Service Air Compressor · Compressors

Class-certified type (DNV register) · technical data sheet not yet verified​‌​‍⁠⁠​‍​​⁠‍‍​‍‍‌‍​⁠

The Sperre ASV 400/10 is a service-air compressor. It is normally installed in the engine room or compressor space connected to a service-air receiver and distribution system. It is designed for compressed air for pneumatic tools, cleaning, controls and other general consumers. The operating principle relies on compression of atmospheric air using the model's installed compressor principle. Compared with neighbouring models, the relevant differences are delivery, pressure, air-end type, cooling, lubrication and dryer arrangement; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on load/unload control, cooling, lubrication, filters, drains, separators, dryer and receiver. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Compressor TypeService Air Compressor
Pressure (bar)10
Capacity (Nm³/h)400
Stages2
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Check delivery and receiver pressure, stage temperatures where fitted, cooling, lubricant condition, intake filters, valves, separators and drains. Verify automatic load/unload or start/stop control, non-return valves and safety devices. Inspect drive, coupling/belts and vibration and review receiver and dryer condition where part of the system.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry filter elements, valve/service kits, gaskets, piston rings or air-end seals as appropriate, belts/coupling elements, drain valves and pressure-control components. Starting-air units may justify spare valve plates or cylinder-service parts; service-air plants may require separator/dryer consumables.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Sperre equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Service Air Compressor.

Other models of the same equipment type, Sperre first.

By manufacturer KaeserIngersoll Rand MarineHaug (Sauer)Mattei MarineAtlas CopcoBitzer MarineTamrotorHatlapaSauer CompressorsSperreSauerTanabeABKKloskaFrascoldAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Sperre models More like Sperre ASV 400/10
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Sperre ASV 400/10 — a part, a service call, a second opinion. Are you Sperre? Claim this brand page.

Service engineer? Write the day report for this ASV 400/10 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.