Fire Pump (Main + Emergency) · Pumps
Naniwa Pump Naniwa FH 200/60 is a marine fire pump. It is normally installed in the engine room or an independently arranged emergency-pump location connected to the vessel fire main. Its primary purpose is to supply firefighting water to hydrants and other fixed fire-service consumers. Compared with ordinary service pumps, a fire pump is safety-critical and its availability, priming and independence arrangements are subject to statutory and class requirements. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect suction and discharge valves, priming arrangement, seals, bearings, drive, remote-start system, relief or test arrangements and foundation. Demonstrate pump operation and fire-main pressure under the approved test procedure. Confirm emergency-pump independence where applicable. Exact required pressure and capacity values must follow the vessel's approved fire-control documentation.
Carry seals or packing, bearings, coupling elements, starter or control spares, priming-system parts, gaskets and critical drive consumables.
Free of charge — send us your request for Naniwa Pump equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Naniwa Pump first.
Tell us what you need for this Naniwa Pump FH 200/60 — a part, a service call, a second opinion. Are you Naniwa Pump? Claim this brand page.
Service engineer? Write the day report for this FH 200/60 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.