Cargo Pump (Deepwell) · Pumps
Naniwa Pump Naniwa FE 200/60 is a deepwell cargo pump in the supplied category 'Pumps / Cargo Pump (Deepwell)'. It is normally installed in or on a cargo tank, with the drive and discharge arrangement connected to the cargo piping system. It is intended to transfer liquid cargo from the tank through the vessel's cargo piping. Compared with neighbouring entries in the same series, the supplied list identifies this unit by its model designation; the meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with suction and discharge piping, valves and strainers, the driver, seal arrangement, instrumentation and local or remote controls. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Naniwa Pump first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect leakage, coupling or drive condition, mounting, vibration, bearing condition, suction strainers and valve positions. Verify normal pressure and flow trends, motor current and local/remote control where fitted. Check seals and running clearances in accordance with the pump design; refer to manufacturer documentation for exact allowable clearances and performance figures.
Carry the correct shaft-seal or gland parts, gaskets and O-rings, bearings where justified by criticality, coupling elements and model-specific wear parts such as impellers, rotors, stators or internal bushings as applicable.
Free of charge — we forward your request to qualified suppliers for Naniwa Pump equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Naniwa Pump Naniwa FE 200/60 — a part, a service call, a second opinion. Are you Naniwa Pump? Claim this brand page.
Service engineer? Write the day report for this Naniwa FE 200/60 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.