Ebara 3M 50/55
Ebara Marine Ebara 3M 50/55 is a marine fire pump. It is normally installed in the engine room or an independently arranged emergency-pump location connected to the vessel fire main. Its primary purpose is to supply firefighting water to hydrants and other fixed fire-service consumers. Compared with ordinary service pumps, a fire pump is safety-critical and its availability, priming and independence arrangements are subject to statutory and class requirements. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect suction and discharge valves, priming arrangement, seals, bearings, drive, remote-start system, relief or test arrangements and foundation. Demonstrate pump operation and fire-main pressure under the approved test procedure. Confirm emergency-pump independence where applicable. Exact required pressure and capacity values must follow the vessel's approved fire-control documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →