Ebara GS 10/23
Ebara Marine Ebara GS 10/23 is a self-priming marine pump. It is normally installed in a machinery or deck-service pumping system where suction piping may contain air before startup. Its primary purpose is to establish suction automatically and transfer liquid without manual filling of the entire suction line. Compared with a conventional centrifugal pump, the self-priming arrangement includes a casing or air-separation feature that allows the pump to evacuate air during startup. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect suction joints for air leakage, casing liquid level where applicable, seals, impeller, recirculation passages, bearings and coupling. Confirm the pump primes from the expected system condition without prolonged dry running. Check strainers and non-return valves. Exact priming limits and clearances require manufacturer documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →