Self-Priming Pump · Pumps
Ebara Marine Ebara GS Series is a self-priming pump (Pumps / Self-Priming Pump). It is normally installed in machinery or service spaces where suction lift or intermittent air entry may occur. It is intended to establish suction without continuously flooded suction piping and transfer service liquids. The meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with suction and discharge piping, valves and strainers, the driver, seal arrangement, instrumentation and local or remote controls.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect leakage, coupling or drive condition, mounting, vibration, bearing condition, suction strainers and valve positions. Verify normal pressure and flow trends, motor current and local/remote control where fitted. Check seals and running clearances in accordance with the pump design; refer to manufacturer documentation for exact allowable clearances and performance figures.
Carry the correct shaft-seal or gland parts, gaskets and O-rings, bearings where justified by criticality, coupling elements and model-specific wear parts such as impellers, rotors, stators or internal bushings as applicable.
Free of charge — send us your request for Ebara Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Ebara Marine first.
Tell us what you need for this Ebara Marine GS Series — a part, a service call, a second opinion. Are you Ebara Marine? Claim this brand page.
Service engineer? Write the day report for this GS Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.