Ebara DW 50/80
Ebara Marine Ebara DW 50/80 is a marine submersible pump. It is normally installed inside a tank, bilge, void or portable drainage location with its motor and hydraulic section submerged in the pumped liquid. Its primary purpose is to remove or transfer liquid where a dry-installed pump would be impractical. Compared with dry-mounted pumps, the submerged motor and cable entry require particular attention to insulation, seals and watertight integrity. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect power cable, gland, lifting arrangement, strainer, impeller, seals and insulation condition. Clean debris from the intake and verify automatic level controls where fitted. Do not lift the pump by its electrical cable. Exact insulation and seal-test limits require manufacturer documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →