Submersible Pump · Pumps
Ebara Marine Ebara DW 25/50 is a marine submersible pump. It is normally installed inside a tank, bilge, void or portable drainage location with its motor and hydraulic section submerged in the pumped liquid. Its primary purpose is to remove or transfer liquid where a dry-installed pump would be impractical. Compared with dry-mounted pumps, the submerged motor and cable entry require particular attention to insulation, seals and watertight integrity. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect power cable, gland, lifting arrangement, strainer, impeller, seals and insulation condition. Clean debris from the intake and verify automatic level controls where fitted. Do not lift the pump by its electrical cable. Exact insulation and seal-test limits require manufacturer documentation.
Carry cable glands, seals, impeller service parts, bearings where supported, level switches, fuses, contactors and a complete spare pump for critical portable drainage duties where practicable.
Free of charge — send us your request for Ebara Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Ebara Marine first.
Tell us what you need for this Ebara Marine DW 25/50 — a part, a service call, a second opinion. Are you Ebara Marine? Claim this brand page.
Service engineer? Write the day report for this DW 25/50 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.