Hamworthy CX 500/220
Hamworthy (Waertsila) Hamworthy CX 500/220 is a shipboard unit in the Pumps group, classified in the source as Ballast Pump. It is normally installed in engine rooms, pump rooms, ballast spaces or cargo system machinery areas according to duty. Its primary duty is to move the designated liquid through shipboard ballast, cooling, bilge, cargo or service piping. In service it interfaces with suction/discharge piping, strainers, valves, motor or hydraulic drive, seals, bearings and control/protection systems. Compared with neighboring entries in the same product family, this record is the exact Hamworthy (Waertsila) Hamworthy CX 500/220 variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect leakage, suction conditions, strainers, bearings, coupling, impeller condition where accessible, motor current and vibration; verify performance against approved pump data and use manufacturer documentation for exact clearances.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →