Centrifugal Pump · Pumps
Iron Pump Iron Pump OND 10/13 is identified in the source list as a centrifugal pump. It is normally installed in an engine room, pump room or machinery-space piping system close to the circuit it serves. Its purpose is to move a continuous liquid flow through shipboard cooling, bilge, cargo-support or other auxiliary systems by converting impeller rotation into fluid pressure and velocity. The existing record identifies bilge duty for this pump. The centrifugal hydraulic element depends on adequate suction conditions, correct rotation and clear flow passages; the exact casing, impeller and priming arrangement are model-specific. The exact model designation and any source-listed power, medium or duty distinguish this unit from neighboring pump sizes; refer to the manufacturer documentation for the exact flow, head and material data.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Iron Pump first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect suction strainers, valves, seals, bearings, coupling alignment, foundation bolts and visible casing condition. Trend suction and discharge indications together with vibration, noise and drive load where available. Verify the pump is correctly primed or flooded as required and that no persistent air ingress is present. Check for shaft leakage, abnormal bearing temperature and deterioration of coupling elements. Inspect the hydraulic parts when performance declines or internal damage is suspected. Refer to the manufacturer documentation for exact clearances, alignment criteria and wear limits.
Keep shaft-sealing components, bearings, coupling elements, casing or cover gaskets and pump-specific wear parts recommended by the manufacturer. For critical service, an impeller or rotating assembly may be appropriate depending on redundancy and onboard repair capability. Confirm all parts against the exact pump model and serial number.
Free of charge — we forward your request to qualified suppliers for Iron Pump equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Iron Pump OND 10/13 — a part, a service call, a second opinion. Are you Iron Pump? Claim this brand page.
Service engineer? Write the day report for this OND 10/13 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.