OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Pumps› Centrifugal Pump› Iron Pump ONC 50/65

ONC 50/65

Centrifugal Pump · Pumps

Class-certified type (DNV register) · technical data sheet not yet verified

Iron Pump Iron Pump ONC 50/65 — Pumps, cooling. It is normally installed in the engine room, pump room, cargo area or auxiliary machinery space within the service defined by the vessel piping arrangement. Its primary purpose is to transfer liquid for the shipboard duty identified by its category. Centrifugal, screw, deepwell, ballast, fire and cargo pumps differ in hydraulic principle and service, so exact construction must follow the installed model documentation. The model designation identifies the listed configuration, but no additional meaning is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Pump Typecentrifugal
Flow Rate (m³/h)50
Head (m)65
Related models

Also in Centrifugal Pump.

Other models of the same equipment type, Iron Pump first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect suction condition, strainers, seals, bearings, coupling or drive, foundation, leakage and associated control valves. Trend pressure, flow, vibration and motor load where available. Investigate abnormal noise, cavitation or repeated trips promptly. Refer to the manufacturer documentation for the exact figure for clearances, wear and pressure limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry seals or packing, bearings where appropriate, coupling parts, gaskets, filters and critical hydraulic or electrical control spares for the installed pump type.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Iron Pump equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Iron Pump models More like Iron Pump ONC 50/65
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Iron Pump ONC 50/65 — a part, a service call, a second opinion. Are you Iron Pump? Claim this brand page.

Service engineer? Write the day report for this ONC 50/65 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.