Ballast Pump · Pumps
DESMI SA 200/68 is a ballast pump. It is normally installed in a machinery space or pump room and connected to the vessel's ballast main and ballast tanks. Its purpose is to transfer seawater or ballast water during ballasting, deballasting and trim or stability operations. The existing database record identifies ballast duty for this pump. Ballast pumps are selected for the vessel's ballast network and must operate reliably across changing tank levels and system resistance. The exact model designation distinguishes this unit from adjacent sizes or hydraulic selections in the same pump family; nozzle size, impeller trim and performance must not be inferred from the name alone.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect suction strainers, valves, seals, bearings, coupling alignment, foundation bolts and visible casing condition. Trend suction and discharge indications together with vibration, noise and motor load where available. Verify that the pump is properly vented or primed before operation and that no persistent air ingress is present on the suction side. Check for shaft leakage, abnormal bearing temperature and deterioration of flexible coupling elements. Inspect the impeller and casing when performance declines or internal damage is suspected. Refer to the manufacturer documentation for the exact clearances, alignment criteria and wear limits.
Keep shaft-sealing components, bearings, coupling elements, casing or cover gaskets and the pump-specific wear parts recommended by the manufacturer. For critical service, an impeller or rotating assembly may be appropriate depending on redundancy and onboard repair capability. Confirm all parts against the exact pump model and serial number.
Free of charge — we forward your request to qualified suppliers for DESMI equipment from our network of over 114,000 maritime companies.
Other models of the same equipment type, DESMI first.
Tell us what you need for this DESMI SA 200/68 — a part, a service call, a second opinion. Are you DESMI? Claim this brand page.
Service engineer? Write the day report for this SA 200/68 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.