Screw Pump · Pumps
The IMO AB (Colfax) IMO AMH 1e6 is a rotary positive-displacement screw pump. It is normally installed in fuel-oil, lubricating-oil or other viscous-liquid systems. It is designed for smooth low-pulsation transfer or circulation of viscous liquids. In operation, intermeshing screws carry sealed liquid volumes axially from suction to discharge. The supplied entry states the pressure designation as 6 bar; this information is retained unchanged. Compared with neighbouring models, the relevant differences are displacement, pressure, screw arrangement, materials, seals and drive; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on suction condition, relief valve, shaft seals, rotor wear, bearings and viscosity control. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, IMO AB (Colfax) first.
What our service work and the manufacturer documentation say about keeping this model running.
Trend suction/discharge pressure, flow where available, motor current, vibration, bearing temperature and leakage. Inspect strainers, valves, seals, bearings, coupling, foundation and rotation and verify standby/changeover arrangements for critical services. Apply pump-type-specific manufacturer limits during overhaul.
Carry seals or packing, gaskets, bearings, coupling elements, filter/strainer consumables and selected motor/starter parts. Critical duties may justify a spare impeller, rotor/stator, screw/gear set or complete pump according to the actual pump principle.
Free of charge — we forward your request to qualified suppliers for IMO AB (Colfax) equipment from our network of over 114,000 maritime companies.
Tell us what you need for this IMO AB (Colfax) IMO AMH 1e6 — a part, a service call, a second opinion. Are you IMO AB (Colfax)? Claim this brand page.
Service engineer? Write the day report for this IMO AMH 1e6 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.