Allweiler SN 10-6
The Allweiler Allweiler SN 10-6 is a rotary positive-displacement screw pump. It is normally installed in fuel-oil, lubricating-oil or other viscous-liquid systems. It is designed for smooth low-pulsation transfer or circulation of viscous liquids. In operation, intermeshing screws carry sealed liquid volumes axially from suction to discharge. The supplied entry states the pressure designation as 6 bar; this information is retained unchanged. Compared with neighbouring models, the relevant differences are displacement, pressure, screw arrangement, materials, seals and drive; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on suction condition, relief valve, shaft seals, rotor wear, bearings and viscosity control. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Trend suction/discharge pressure, flow where available, motor current, vibration, bearing temperature and leakage. Inspect strainers, valves, seals, bearings, coupling, foundation and rotation and verify standby/changeover arrangements for critical services. Apply pump-type-specific manufacturer limits during overhaul.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →