Submersible Pump · Pumps
Grundfos marine pumps. Grundfos marine pumps are horizontal single-stage centrifugal pumps with suction and discharge ports at the same height. For marine and seawater duties they are available in high-grade stainless steel (EN 1.4408, EN 1.4517) or titanium. Capacity reaches 1,300 m³/h with a head of up to 137 m, and discharge sizes run from 1.25 in to 10 in.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Insulation resistance test | every 3-6 months and before extended lay-up |
|---|---|
| Strainer cleaning | typically each use in dirty bilge/ballast duty |
| Full pump/motor overhaul (bearings, seals, wear parts) | bauart-typical 15,000-25,000 running hours - confirm against the manufacturer's manual |
| Cable and gland inspection | annually |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Impeller/wear ring clearance | typically 0.2-0.3 mm new, renew around 0.8-1.0 mm before efficiency loss becomes significant - confirm against the manufacturer's manual |
|---|---|
| Motor insulation resistance | investigate/replace when it falls below roughly 1 MΩ - confirm against manufacturer/class guidance |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Bilge/ballast submersible pumps are typically covered under Continuous Survey Machinery; class looks for a satisfactory operational test (flow/pressure), insulation resistance records, and confirmation that bilge alarms and pump interlocks function correctly.
Estimated lifetime: Bauart-typical submersible pump sets of this size run 20,000-40,000 hours before major overhaul in continuous bilge/ballast duty, depending on water quality and duty cycle - confirm against the manufacturer's manual.
Free of charge — send us your request for Grundfos Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Grundfos Marine first.
Tell us what you need for this Grundfos Marine SP 80-84 — a part, a service call, a second opinion. Are you Grundfos Marine? Claim this brand page.
Service engineer? Write the day report for this SP 80-84 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.