"> Sailor (Cobham) 6320 MF/HF
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 25 verified suppliers & service companies for Sailor (Cobham) in the Maritime Network Find suppliers →
Sailor (Cobham)

6320 MF/HF

The Sailor 6320 is a GMDSS‑approved MF/HF transceiver delivering up to 250 W PEP, with integrated DSC, ALE and Winlink email capability for long‑range distress and routine communications. The supplied category identifies the equipment as HF Radio, and it is normally installed on the bridge, radio station or survival-craft equipment position appropriate to the listed type. In that listed role, its primary purpose is to provide distress, safety, operational communication or search-and-rescue locating capability. VHF, MF/HF, satellite terminals, EPIRBs and SARTs use different communication paths and emergency roles, so testing must follow the specific approved procedure. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 250 W PEP. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

250 W PEP
Capacity
Navigation Data / Sensor
Medium

Components & Design

Component data being added…

Technical Data

power output 250 W PEP
frequency range 1.6-27.5 MHz
gmdss approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Antenna, feeder or casing damage reduces communication or locating performance and may cause self-test faults
Battery, emergency-power or power-supply deterioration causes resets, low-voltage alarms or failure to operate
Water ingress or corrosion causes intermittent operation, damaged connectors or internal faults
Configuration, registration or identity errors cause incorrect vessel or beacon information
Internal transceiver, display or control faults cause failed self-tests, missing communications or unavailable emergency functions

Service & Maintenance

Inspect antennas, casing, mounting, power supplies, emergency batteries, controls and programmed identity data as applicable. Perform only approved self-tests and permitted radio tests. Verify accessibility, release arrangements and emergency-power availability where required. Refer to manufacturer and regulatory documentation for the exact figure for test and replacement criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuses, handsets or microphones where applicable, approved batteries or chargers, antenna connectors, mounting or release parts and supported control modules.
Equipment Model #758 · ✓ still in production