Incinerator (IMO MEPC.244) · Incinerator
The Saacke SKVG-C-1000 is a marine incinerator. It is normally installed in a dedicated machinery-space area with waste feed, combustion air, fuel and exhaust systems. It is designed for controlled thermal destruction of approved ship-generated waste and eligible oily residues. The operating principle relies on primary/secondary combustion under controlled air supply and temperature monitoring. The supplied entry gives no additional verified capacity, pressure, power or dimensional figure for this model. Compared with neighbouring models, the relevant differences are waste throughput, sludge capability, burner arrangement, refractory and control architecture; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on burners, refractory, feed systems, fans/dampers, temperature monitoring, interlocks and records. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Saacke first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect refractory, burners, waste/sludge feed, combustion-air fans, dampers, furnace doors, ash removal and exhaust uptake. Verify flame safeguard, temperature indication, alarms, interlocks and emergency shutdown. Review waste records and the vessel's procedures for prohibited materials.
Carry burner/atomizing parts, ignition electrodes, flame detector, temperature sensors, door seals, approved refractory repair materials, fan service parts and waste-feed pump/valve spares appropriate to the installed unit.
Free of charge — we forward your request to qualified suppliers for Saacke equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Saacke SKVG-C-1000 — a part, a service call, a second opinion. Are you Saacke? Claim this brand page.
Service engineer? Write the day report for this SKVG-C-1000 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.