Oily Water Separator (15 ppm) · Oily Water Separator
Wartsila AQUARIUS AQ-OWS-5 — 5.0 m³/h capacity. It is normally installed in the engine-room bilge-treatment area between bilge holding arrangements and the approved recirculation or discharge piping. Its primary purpose is to remove oil from contaminated bilge water before any permitted overboard discharge. Unlike ordinary settling equipment, an approved OWS is integrated with oil-content monitoring and automatic stopping or recirculation. The model designation identifies the listed configuration, but no additional meaning is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Wartsila AQUARIUS first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect separation stages, filters, pumps, monitor sample lines, automatic stopping devices and overboard valve arrangements. Verify that the approved treatment route cannot be bypassed and review operating records where required. Clean and check the oil-content monitor according to the approved procedure. Refer to the manufacturer documentation for the exact figure for flow, pressure and calibration criteria.
Carry filter or coalescer elements, pump seal kits, monitor service items, solenoid and diverting-valve parts, sample-line fittings, gaskets and sensors.
Free of charge — we forward your request to qualified suppliers for Wartsila AQUARIUS equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Wartsila AQUARIUS AQ-OWS-5 — a part, a service call, a second opinion. Are you Wartsila AQUARIUS? Claim this brand page.
Service engineer? Write the day report for this AQ-OWS-5 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.