Oily Water Separator (15 ppm) · Oily Water Separator
Fuji Filter Marine FFM-500 — 0.5 m³/h capacity. It is normally installed in the engine-room bilge-treatment area between bilge holding arrangements and the approved recirculation or discharge piping. Its primary purpose is to remove oil from contaminated bilge water before any permitted overboard discharge. Unlike ordinary settling equipment, an approved OWS is integrated with oil-content monitoring and automatic stopping or recirculation. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect separation stages, filters, pumps, monitor sample lines, automatic stopping devices and overboard valve arrangements. Verify that the approved treatment route cannot be bypassed and review operating records where required. Clean and check the oil-content monitor according to the approved procedure. Refer to the manufacturer documentation for the exact figure for flow, pressure and calibration criteria.
Carry filter or coalescer elements, pump seal kits, monitor service items, solenoid and diverting-valve parts, sample-line fittings, gaskets and sensors.
Free of charge — send us your request for Fuji Filter Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Fuji Filter Marine first.
Tell us what you need for this Fuji Filter Marine FFM-500 — a part, a service call, a second opinion. Are you Fuji Filter Marine? Claim this brand page.
Service engineer? Write the day report for this FFM-500 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.