AOM-500
Aomi Marine AOM-500 is identified in the source list as a oily-water separator. It is normally installed in the engine-room bilge-treatment area and connected to bilge holding, recirculation, discharge and monitoring arrangements. Its purpose is to treat oily bilge water before any permitted overboard discharge through the vessel's approved pollution-prevention system. The existing database record states 0.5 m³/h capacity. The category identifies a 15 ppm oily-water separator, but the exact separation stages, filter media and monitoring architecture are model-specific. The exact model designation identifies the certified separator and monitoring configuration; treatment capacity and approval details must be taken from the equipment certificate and manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect separator chambers, coalescing or filter elements, sample lines, oil-content monitor, automatic stopping or recirculation devices and associated valves. Keep the bilge feed as free as practicable from detergents and emulsifying chemicals that can impair separation. Flush and clean sample lines and sensors according to the approved manual and verify alarms and automatic diversion functions after maintenance. Check the piping arrangement against approved drawings and ensure no bypass route compromises the system. Maintain records and calibration or verification evidence required by the vessel's procedures and applicable regulations. Refer to the approved manufacturer documentation for exact test methods, element replacement criteria and operating limits.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →