WBS-250
Wuxi Brightsky WBS-250 is a 15 ppm oily water separator in the supplied category 'Oily Water Separator / Oily Water Separator (15 ppm)'. It is normally installed in the engine room bilge-treatment area with connections to bilge holding tanks, discharge lines and the oil-content monitoring system. It is intended to separate oil from bilge water before any permitted overboard discharge and to support compliance with the vessel's pollution-prevention procedures. Compared with neighbouring entries in the same series, the supplied data identifies this variant by the source-listed characteristic 0.25 m³/h capacity. In service it interfaces with bilge pumps and tanks, separation stages, oil-content monitor, automatic stopping or recirculation valves, sampling line and control panel. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect separator internals accessible for routine maintenance, coalescer or filter condition, pumps, valves, drains, sample lines and evidence of unauthorized bypassing. Function-test the oil-content monitor, alarms and automatic stopping or recirculation arrangement using the approved onboard procedure. Check records and seals required by the vessel's pollution-prevention management; use manufacturer documentation for exact test and replacement criteria.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →