Shaft Seal · Shaft Line Equipment
The SKF Simplex Compact 200 mm is a compact lip‑type shaft seal designed for 200 mm diameter shafts, offering reliable sealing in moderate pressure and temperature marine applications. The supplied category identifies it as Shaft Seal, and it is normally installed at the inboard or outboard end of the stern tube around the propulsion shaft where the shaft passes between the hull and surrounding water or lubricating-oil system. In that role, its primary purpose is to control seawater ingress and lubricating-oil leakage while allowing the shaft to rotate. Lip, face and other stern-tube seal designs use different sealing elements, but all depend on smooth shaft or liner surfaces, correct lubrication and undamaged sealing rings. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, SKF Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect leakage, seal-oil or header-tank behaviour, shaft-liner condition where accessible, piping, vents and pressure-balancing arrangements. Check for signs of seawater contamination in stern-tube oil and for external oil loss. Review leakage trends rather than relying only on a single observation. Refer to the manufacturer documentation for the exact figure for pressure balance, liner wear and seal replacement criteria.
Carry complete seal-ring or lip sets, O-rings, gaskets, approved seal lubricants and liner-repair or emergency sealing provisions where specified by the vessel support plan.
Free of charge — we forward your request to qualified suppliers for SKF Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this SKF Marine Simplex Compact 200mm — a part, a service call, a second opinion. Are you SKF Marine? Claim this brand page.
Service engineer? Write the day report for this Simplex Compact 200mm in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.