US-100 stern
The Kongsberg US‑100 is a retractable azimuth thruster for stern installation delivering up to 12 kN of thrust from a 580 mm propeller at 100 kW, allowing the unit to be withdrawn into the hull when not required.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Sichtpruefung auf Schaedigungen, Freispiel, Blattoberflaeche glatt ohne Kratzer/Dellen. Blattwurzel-O-Ringe auf Verschleiss checken, Spitzzenspiel messen. Bei Zweifeln: 1,5 bar Luftdruck auf VT-Nippel, Seifenblasen-Test auf Oellecks.
Visual inspection for leaks around shaft seal, check sealing cavity (monitored automatically via ARC). Observe seal clip pressure (e.g. via sensor output). At 5-year overhaul: renew seal. Check adaptive pressure regulation.
Calipers/counter gauges: measure shaft diameter and bores (target value via manufacturer data sheet). Document caliper readings. If exceeded: replace bearing journal/bearing shells. Observe vibration/noise during operation.
Check fluid level in tank (target level). Color test: light/yellowish OK, cloudy/dark = change required. Particle count (if available). Change filter per manufacturer interval. Perform pressure test on hydraulic line.
Visual inspection of all hoses, pipes, connections for defects. Check for dryness, corrosion (rust spots), kink marks. High-frequency leak test if necessary. Observe operating pressure during voyage.
Visual inspection of all O-rings/seals for wear, hardening, deformation. Test with finger pressure (elasticity). Clean O-ring grooves/lubricate with gearbox oil (at 5-year overhaul). Replace damaged parts.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →