"> Marine Exhaust Systems MES-A-300-30dB
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 5 verified suppliers & service companies for Marine Exhaust Systems in the Maritime Network Find suppliers →
Marine Exhaust Systems

MES-A-300-30dB

Marine Exhaust Systems MES-A-300-30dB is listed as a marine exhaust silencer or muffler in the Exhaust Silencer / Exhaust Silencer / Muffler category. Equipment of this class is typically installed in the exhaust-gas line between an engine or combustion unit and the uptake or outlet. Its shipboard purpose is to attenuate exhaust noise while allowing combustion gases to pass with acceptable flow resistance. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

noise reduction db 30
max exhaust temp c 600
diameter mm 300
back pressure mbar 25

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Soot, ash, or deposit accumulation increases backpressure and causes loss of engine performance or high exhaust temperature
Internal baffle, acoustic element, or support damage from vibration or thermal cycling causes rattling, reduced attenuation, or loose internal parts
External corrosion or condensate attack perforates the shell and produces exhaust leakage or soot staining
Expansion-joint, flange, or gasket failure from movement or heat results in hot-gas leakage and audible exhaust noise
Water ingress or failed drains accelerates internal corrosion and can create abnormal noise or restriction

Service & Maintenance

Inspect shell and supports, flanges, flexible joints, insulation, drains, soot deposits, hot spots, exhaust leakage, vibration, and evidence of excessive backpressure. Internal inspection and allowable backpressure must follow engine and silencer manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry flange gaskets, flexible-joint or expansion-element spares where applicable, drain components, fastening hardware, insulation repair materials, and any replaceable internal elements.
Equipment Model #72184 · ✓ still in production