OceanSphereENGINES

45000A

Propulsion Gearbox / Reduction Gear · Propulsion Gearbox

Class-certified type (DNV register) · technical data sheet not yet verified​‌​‌‍​​‌​‍‍‍‌⁠⁠​‍⁠⁠‍

The ZF 45000A is a high‑power single‑stage reduction gearbox that converts engine speed of 1200 rpm to a propeller speed of 400 rpm with a 3:1 ratio, delivering up to 45 000 kW. As a Reduction Gear, it is normally installed between a propulsion engine or motor and the shaft line, reducing or adapting rotational speed and transmitting torque to the propeller. In that role, its primary purpose is to match prime-mover speed and torque to the propulsion shaft while providing the required clutching or reduction arrangement. Single-stage, multi-stage and epicyclic marine gearboxes differ in gear geometry and layout, but all depend on alignment, tooth contact, bearings and clean pressurized lubrication. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Power Rating (kW)45000
Ratio3:1
Input Speed1200
Output Speed400
Typesingle reduction
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect oil level and condition, filters, coolers, pumps, bearing temperatures, vibration, seals and alignment. Review magnetic plugs or oil-debris findings and investigate changes in gear noise. Check clutch or control response where applicable. Refer to the manufacturer documentation for the exact figure for backlash, tooth contact, oil pressure and bearing limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry filters, pump and valve service parts, seals, approved lubricants, clutch components where fitted, temperature or pressure sensors and critical bearing or fastening parts.

Need this part?

Request a quote for this model.

Free of charge — send us your request for ZF Marine equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Propulsion Gearbox / Reduction Gear.

Other models of the same equipment type, ZF Marine first.

By manufacturer ReintjesRossiRenkZFZF MarineLeroy-SomerD16-0045Hanla IMSME ProductionLafertMuirRadiconFinnøy Gear & PropellerTwin DiscMasson MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All ZF Marine models More like ZF 45000A
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this ZF Marine 45000A — a part, a service call, a second opinion. Are you ZF Marine? Claim this brand page.

Service engineer? Write the day report for this 45000A in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.