Pneumatic Tool (Workshop) · Workshop Air Tools
TONE Marine TM-38 imp is a pneumatic workshop tool. It is normally installed in the engine-room workshop, deck workshop or maintenance stores and connected temporarily to the vessel service-air system. Its primary purpose is to provide portable mechanical power for cutting, grinding, fastening or other maintenance work depending on tool configuration. Compared with electric tools, pneumatic tools avoid an onboard electric motor at the handpiece but depend on clean, correctly lubricated compressed air and sound hose connections. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect hose, coupling, trigger, guard, attachment retention and air inlet. Keep the tool clean and use the lubrication method specified by the manufacturer. Check for abnormal vibration and air leakage before use. Exact air pressure and accessory limits require manufacturer documentation.
Carry hose couplings, O-rings, trigger or valve kits, vanes or motor service parts where supported, guards and approved tool attachments.
Free of charge — send us your request for TONE Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, TONE Marine first.
Tell us what you need for this TONE Marine TM-38 imp — a part, a service call, a second opinion. Are you TONE Marine? Claim this brand page.
Service engineer? Write the day report for this TM-38 imp in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.