OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 9 verified suppliers & service companies for Makita Marine in the Maritime Network Find suppliers →
Is Makita Marine your company? Claim this page
Makita Marine

AN453

Makita Marine AN453 is identified in the source list as a pneumatic workshop tool. It is used in the vessel's workshop, machinery spaces or maintenance areas and connected temporarily to the service-air system through suitable hose and fittings. Its purpose is to provide portable mechanical work using compressed air as the power source. The existing database record provides no additional model-specific operating figure beyond the listed designation and category. The exact tool function, air consumption, lubrication requirement and accessory interface depend on the specific model. The exact model designation identifies the tool function and air requirement; these values must be confirmed from the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

tool type riveter
air consumption l min 180
weight kg 1.2
power w 350

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Low power caused by inadequate air pressure, restricted hose or clogged inlet screen, resulting in slow or weak tool operation
●Internal vane or motor wear caused by poor lubrication or contamination, resulting in reduced speed and irregular running
●Air leakage caused by worn seals, couplings or hose damage, resulting in audible leakage and reduced performance
●Trigger or valve sticking caused by dirt or corrosion, resulting in difficult control or failure to stop correctly
●Accessory or spindle wear caused by overload or incorrect attachment, resulting in vibration, poor tool control or damaged workpieces

Service & Maintenance

Inspect the tool body, trigger, hose, couplings, guards and accessories before use. Drain moisture from the service-air system and provide lubrication if required by the tool design. Keep inlet screens clean and remove damaged hoses or couplings from service. Verify accessories are correctly retained and suitable for the tool. Investigate excessive vibration, leakage or loss of power before continued use. Refer to manufacturer documentation for exact air requirements, lubrication and service procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep hose couplings, seals, inlet screens, lubrication consumables and manufacturer-recommended vane, bearing or trigger service parts. Tool-specific accessories should be stocked according to onboard maintenance needs. Confirm compatibility with the exact model.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Makita Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #71342 · ✓ still in production