Oil Mist Detector · Oil Mist Detection
GE Marine GE OMD-3 6ch is a crankcase oil-mist detector (Oil Mist Detection / Oil Mist Detector). It is normally installed on or close to a diesel engine with sampling connections from the crankcase spaces. It is intended to detect an abnormal oil-mist condition that can precede a crankcase fire or explosion. The meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with crankcase sampling pipes or sensors, the detector unit, engine alarm and shutdown logic and any cleaning-air arrangement.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect sample pipes, drains, sensing chamber cleanliness, fans or flow devices and electrical connections. Run the prescribed self-test and functional test and verify alarm or shutdown transmission to the engine safety system. Do not substitute improvised sensitivity checks; exact test media, settings and acceptance criteria must follow manufacturer and engine documentation.
Keep approved cleaning materials, filters, seals, sampling-pipe fittings and critical sensor, fan or electronic modules according to the installed system's spares recommendation.
Free of charge — send us your request for GE Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, GE Marine first.
Tell us what you need for this GE Marine OMD-3 6ch — a part, a service call, a second opinion. Are you GE Marine? Claim this brand page.
Service engineer? Write the day report for this OMD-3 6ch in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.