Exhaust Gas Cleaning System (Scrubber) · Exhaust Gas Cleaning
Clean Marine AS CM-EGCS-2000 closed-loop — Exhaust Gas Cleaning. The supplied category identifies the equipment as Exhaust Gas Cleaning System (Scrubber), and it is normally installed in the main or auxiliary engine exhaust path with treatment tower, pumps, water-treatment equipment, analyzers and control systems as applicable. In that listed role, its primary purpose is to reduce regulated exhaust-gas pollutants before discharge to atmosphere. Open-loop, closed-loop and other scrubber arrangements differ in wash-water handling, but all depend on gas-side flow, liquid circulation, monitoring and compliant discharge or residue handling. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Clean Marine AS first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect scrubber internals where accessible, wash-water pumps, spray nozzles, piping, analyzers, dosing or water-treatment equipment and drains. Trend emissions and process readings and review alarms and compliance records. Maintain residue handling and overboard control under the vessel's approved environmental procedure. Refer to the manufacturer and statutory documentation for the exact figure for emissions, chemistry, pressure and flow criteria.
Carry pump and valve seals, spray nozzles, analyzer consumables, filters, dosing components, sensors and control relays.
Free of charge — we forward your request to qualified suppliers for Clean Marine AS equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Clean Marine AS CM-EGCS-2000 closed-loop — a part, a service call, a second opinion. Are you Clean Marine AS? Claim this brand page.
Service engineer? Write the day report for this CM-EGCS-2000 closed-loop in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.