OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Separators & Purifiers› Fuel Oil Purifier› Westfalia OSA 50-02

OSA 50-02

Fuel Oil Purifier · Separators & Purifiers

Class-certified type (DNV register) · technical data sheet not yet verified

Westfalia OSA 50-02 is a centrifugal fuel-oil purification module listed in the supplied equipment record. It is normally installed in the fuel-treatment room or engine-room separator area with connections to settling, service, sludge and conditioning systems. Its primary purpose is to separate water and solid contaminants from fuel before the fuel reaches service tanks and engine consumers. Compared with a simple filter, the purifier uses high-speed centrifugal separation and includes a rotating bowl, drive, operating-water or discharge functions and dedicated controls. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Throughput (l/h)5000
Fuel TypeHFO/MGO
Filtration (µm)5
Related models

Also in Fuel Oil Purifier.

Other models of the same equipment type, Westfalia first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect bowl and disc-stack cleanliness, seals, operating-water passages, drive condition and vibration history. Confirm correct assembly and locking after overhaul and verify the discharge sequence and alarms. Check fuel temperature and process conditions against the approved setup. Bowl-speed, wear and assembly criteria must be taken from the manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry bowl seal kits, O-rings, operating-water seals, solenoid or valve service parts, bearings where appropriate, friction or drive components, feed-pump seals and the manufacturer-recommended set of separator consumables.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Westfalia equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMIGS-HydroAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Westfalia models More like OSA 50-02
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Westfalia OSA 50-02 — a part, a service call, a second opinion. Are you Westfalia? Claim this brand page.

Service engineer? Write the day report for this OSA 50-02 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.