OC-3000-HFO
OilCare International OC-3000-HFO is identified in the source list as a fuel-oil filter. It is normally installed in the engine-room fuel treatment or supply system upstream of engines, pumps or sensitive fuel-system components. Its purpose is to remove solid contamination from fuel and protect downstream injection and pumping equipment. The existing database record identifies HFO as the stated fuel service. Depending on the model it may use simplex, duplex, automatic backflushing or another filtration arrangement, which must be confirmed from the installed documentation. The exact model designation identifies filter size and internal arrangement; filtration rating, flow capacity and pressure limits must be confirmed from manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Monitor differential pressure and downstream fuel pressure and investigate rapid fouling rather than repeatedly bypassing the filter. Inspect elements, baskets, backflush mechanisms, covers, drains and seals for contamination and damage. Maintain fuel temperature and viscosity conditions appropriate to the vessel's fuel system. Clean or replace elements using the approved procedure and prevent dirt entering the clean side during maintenance. Check automatic changeover or backflush functions where fitted. Refer to manufacturer documentation for exact element grade, differential-pressure limits and servicing criteria.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →