"> Raytheon Anschütz NSC 34 Radar
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Raytheon Anschütz in the Maritime Network Find suppliers →
Raytheon Anschütz

NSC 34 Radar

The NSC 34 Radar is a marine radar system designed for navigation and bridge equipment, featuring X/S-Band frequency and a range of up to 120 nautical miles. Its defining feature is its ability to integrate with the Synapsis system for enhanced functionality. The supplied category identifies the equipment as Marine Radar, and it is normally installed on the bridge with the required external sensors, antennas, displays and data-network interfaces. In that listed role, its primary purpose is to provide navigation, position, heading, speed, depth, traffic or bridge-management information according to the listed category. Radar, ECDIS, gyrocompass, GNSS, speed log, echo sounder and integrated bridge systems use different sensing principles, so calibration and interfaces must match the actual installed equipment. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 12/25 kW. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Raytheon Anschütz NSC 34 Radar
12/25 kW
Capacity
Navigation Data / Sensor
Medium

Components & Design

Component data being added…

Technical Data

frequency X/S-Band
power output 12/25 kW
range nm 120
imo approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor, antenna or transducer fouling, damage or misalignment causes unstable, missing or inaccurate data
Power-supply or processor faults cause resets, blank displays or complete loss of indication
Cable, connector or network faults cause intermittent data or loss of outputs to dependent bridge systems
Incorrect configuration or calibration causes persistent disagreement with independent references
Display, storage or software faults cause frozen values, alarms or unavailable navigation functions

Service & Maintenance

Inspect sensors, antennas, transducers, cabling, power supplies, displays and data interfaces. Compare information with independent references and review alarm history. Verify distribution to dependent bridge systems and confirm approved backup arrangements. Refer to the manufacturer documentation for the exact figure for calibration, alignment and performance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuses, interface cables, approved power supplies, sensor or antenna parts and supported display or processor modules, together with backed-up configuration data where applicable.
Equipment Model #694 · ✓ still in production