NautoScan NX Mk2 S 12ft
Raytheon Anschütz NautoScan NX Mk2 S 12ft is a shipboard unit in the Radar & ECDIS group, classified in the source as Radar. It is normally installed on the bridge, with radar scanners/antennas mounted on the mast or superstructure and ECDIS operator stations at navigation consoles. Its primary duty is to support collision avoidance, situational awareness and electronic navigation by presenting radar targets or approved chart/navigation information. In service it interfaces with GNSS, gyro/heading, speed log, AIS, radar scanners, bridge networks, displays and alarm systems. Compared with neighboring entries in the same product family, this record is the exact Raytheon Anschütz NautoScan NX Mk2 S 12ft variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Check self-test and alarm logs, scanner condition, antenna rotation where applicable, sensor inputs, display controls, chart/update status for ECDIS, network interfaces and backup arrangements; exact alignment and performance criteria follow manufacturer and statutory documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →