OLG-8

The Oleology OLG-8 is a 15 ppm oily water separator. It is normally installed in the engine-room bilge-treatment area with feed pump, oil-content monitor and discharge/recirculation valves. It is designed for treatment of machinery-space bilge water before any permitted overboard discharge. In operation, separation/coalescence/filtration stages remove oil before monitored discharge. The supplied entry states a capacity of 8.0 m³/h; this information is retained unchanged. Compared with neighbouring models, the relevant differences are treatment capacity, separation stages, consumables, monitor and control configuration; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on separator condition, coalescers/filters, oil-content monitor, stop/recirculation valve, piping integrity and records. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.