Oily Water Separator (15 ppm) · Oily Water Separator
Parker Hannifin Marine PH-OWS-150 — 15 m³/h capacity. As an Oily Water Separator (15 ppm), it is normally installed in the engine-room bilge or liquid-treatment area with pumps, sludge handling, monitoring and approved discharge or recirculation piping. In that role, its primary purpose is to separate oil, water or solids from a process stream before reuse, storage or permitted discharge. Centrifugal purifiers and oily-water separators use different separation principles, so bowl, coalescer, monitor and discharge arrangements must be identified from the installed system. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the separation element or bowl, filters, pumps, seals, monitoring, sample lines and sludge or discharge arrangements. Review outlet quality and operating trends and verify that approved discharge paths cannot be bypassed where statutory controls apply. Clean and test monitors according to the approved procedure. Refer to the manufacturer documentation for the exact figure for flow, temperature, pressure and calibration criteria.
Carry filters or coalescers, bowl or seal kits as applicable, pump seals, monitor service parts, solenoids, sample-line fittings, gaskets and selected sensors.
Free of charge — send us your request for Parker Hannifin Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Parker Hannifin Marine first.
Tell us what you need for this Parker Hannifin Marine PH-OWS-150 — a part, a service call, a second opinion. Are you Parker Hannifin Marine? Claim this brand page.
Service engineer? Write the day report for this PH-OWS-150 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.