Oily Water Separator (15 ppm) · Oily Water Separator
PureSep Marine PS-80 is identified in the source list as a oily-water separator. It is normally installed in the engine-room bilge-treatment area and connected to bilge holding, recirculation, discharge and monitoring arrangements. Its purpose is to treat oily bilge water before any permitted overboard discharge through the vessel's approved pollution-prevention system. The existing database record states 8.0 m³/h capacity. The category identifies a 15 ppm oily-water separator, but the exact separation stages, filter media and monitoring architecture are model-specific. The exact model designation identifies the certified separator and monitoring configuration; treatment capacity and approval details must be taken from the equipment certificate and manufacturer documentation.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, PureSep Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect separator chambers, coalescing or filter elements, sample lines, oil-content monitor, automatic stopping or recirculation devices and associated valves. Keep the bilge feed as free as practicable from detergents and emulsifying chemicals that can impair separation. Flush and clean sample lines and sensors according to the approved manual and verify alarms and automatic diversion functions after maintenance. Check the piping arrangement against approved drawings and ensure no bypass route compromises the system. Maintain records and calibration or verification evidence required by the vessel's procedures and applicable regulations. Refer to the approved manufacturer documentation for exact test methods, element replacement criteria and operating limits.
Keep approved separation or filter elements, seals, gaskets, sample tubing, monitor service items, valve-actuator consumables and feed-pump spares recommended for the installed system. Any oil-content monitor replacement or calibration component must match the approved equipment. Use only parts accepted for the certified configuration.
Free of charge — we forward your request to qualified suppliers for PureSep Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this PureSep Marine PS-80 — a part, a service call, a second opinion. Are you PureSep Marine? Claim this brand page.
Service engineer? Write the day report for this PS-80 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.